Our painter wouldn't start until we'd cleaned the exterior properly
Wash NZ did a thorough pre-paint wash. The finish came out smooth and lasting.
For Homeowners Preparing to Paint
Surface preparation that removes mould, grime and chalky oxidation, so your painter starts on a clean, paint-ready base.

What we do
We wash your exterior thoroughly before painting to remove grime, chalk, and mould, giving your new paint the best chance to stick and look sharp. Our work means your painter starts on the best possible surface, and your final finish looks better for longer.
Paint needs a clean surface to stick properly. We wash away dirt, grime, and contaminants so your new paint will last.
We remove chalky residue and mildew from weatherboards and cladding, critical steps that make a visible difference to your final paint job.
We ensure surfaces are not just clean, but dry: no hidden moisture to ruin a fresh coat. It's the prep your painter hopes you've done.
Switching colours? We help reset the surface so your new colour shows clearly and evenly, with no patches or streaks.

Why it matters
Common situations our pre-paint house washing customers come to us with, and how it turned out.
Wash NZ did a thorough pre-paint wash. The finish came out smooth and lasting.
Their soft wash removed the grime and gave us a perfect base.
Their advice and cleaning service made a real difference to the final look.
Not this time. Wash NZ gave us a clean, dry surface that helped it stick.
Before & after
Weatherboard wall, mould and grime removed. A real WashNZ job.
BeforeAfter
Drag, tap or use your arrow keys to compare
How it works
Getting started is easy. Contact us, schedule your service, and enjoy the results.
Contact us to discuss your needs and receive a free, no‑obligation quote.
Choose a convenient time for your service with our flexible scheduling.
Relax while we take care of your property's cleaning needs.
FAQs
Something else on your mind? Call 021 66 88 45 or send us a message.
A pre-paint wash focuses on surface preparation: removing mould, grime and oxidised “chalk,” and ensuring the surface is clean, sound, and ready for primer and topcoats. It's a more thorough, painter-friendly process.
Yes. We carry out mould and chalk removal using painter-safe detergents and controlled soft-wash techniques, followed by a thorough rinse, so primers and topcoats can bond properly.
Typically yes. We aim for a paint-ready dry finish on the same day (weather dependent). Your painter can then prime/paint as soon as moisture levels and conditions are suitable.
It is. We use a low-pressure soft-wash approach suited to weatherboards, plaster, brick, and metal claddings, adjusting technique to protect delicate or ageing coatings while still achieving a clean, stable surface.
We tailor the clean for colour-change prep by paying extra attention to high-exposure areas, streaking, and residual chalk so the new colour lays evenly and the finish looks consistent.
Ideally 2–5 days before painting to allow for any weather rescheduling and to ensure a dry, dust-free surface on paint day. We can coordinate timing directly with your painter if you prefer.
Free, no‑obligation quotes
Tell us about your property and we'll get back to you with a free, no‑obligation quote.